Our company produce vertical turbine pump,vertical long axis pump, vertical type condensate pump ,vertical wet pit pump,right Angle gear box
Manufacturer of vertical turbine pumpFocus on vertical wet pit pump, right Angle gear box
HOTLINE:+8618507312158+8613974960765
Contact us
Vertical turbine pump manufacturers
HOTLINE::+8613974960765
Mobile:+8618507312158
Email:sale@ljpump.net
Address :China's hunan province changsha furong road long xiang industrial park
联系人:Hu Sir
Your position: HOME >> Product >> API 610 Pumps
API 610 Pumps

API610 VS1/VS6 Series Vertical Suspension Turbine Pumps

API610 VS1/VS6 Series Vertical Suspension Turbine Pumps

Executive Standards:GB/T 3215-2019ISO13709

Reference Standard:API610-2010

01.jpg

Maximum flow: 8,800 m³/hr (39,600 gpm)


Maximum head: 456 m (1500 ft)


Maximum temperature: 200°C (388°F)


Discharge diameter (mm): 100-1000mm


Working pressure: P=11MPa

Operating temperature: T=-60+150℃(Inner shell segmental type) 

Operating temperature:T=-196+150℃(Inner shell deflector shell type)

Applications: It can convey a variety of clean, polluted, low or high temperature, chemically neutral or corrosive liquids. It is mainly used in refineries, petrochemical industry, cryogenic engineering, pipeline pressure regulation or offshore platforms, condensate extraction in the energy industry, liquefied gas engineering, etc.

Product Overview


The VS1/VS6 series vertical suspension pumps comply with API610 11th Edition and ISO13709 "Centrifugal Pumps for the Petroleum, Heavy Chemical and Gas Industries" standards.



VS1 is a vertical suspension type, a single-layer shell, and its discharge pipe passes through the riser pump; VS6 is a vertical suspended and double-layer casing pump; Suitable for all occasions.

This series of pumps is a new generation of low-temperature resistant and anti-cavitation pumps independently developed by our company to absorb foreign advanced technology. The impeller is a single-suction structure, radial or guide vane with a guide shell. The first-stage impeller has excellent cavitation resistance. The pump is equipped with a balance drum device to balance the axial force, and the residual axial force is borne by the matched bearings.

This series of pumps has been carefully considered in the hydraulic design, rotor rigidity, shaft connection mode, guide bearing structure, mechanical seal components, seal flushing and other auxiliary systems, and solves the use and installation defects of in-service pumps in the market.

 VS1 and VS6 Series Vertical Suspension Turbine Pumps.jpg

Model Description

VS1/VS6  500-72×8-A-D


VS1API610 (ISO13709)Single-shell vertical suspension pump

VS6API610 (ISO13709)Double-shell vertical suspension pump

500FLOW(m³/h

72 HEADm

8Impeller progression 

AProduct classification code

A—Multi-stage radius guide vane structure

B—Multi-level space diversion shell structure

C—Single-stage, two-stage high-flow inclined flow pump structure

 DStructural code

D—First-stage double-suction structure (single suction is not indicated) K—Open impeller structure

J—The first stage impeller sinking structure

Fields of Application

 

★ Petrochemical         Refineries       Cryogenic engineering

★ Oilfield gathering and transportation  ★ Offshore platforms

       ★ Petrochemical Industry Engineering        ★ Coal processing industry

★ Cold oil transportation engineering  ★ Environmental engineering 

Line pressurization  Offshore oil ★ Gas separation device

★ Vapor-liquid pumping in the energy industry  Light hydrocarbons  

Liquefied gas engineering      ★ Low cavitation applications     


Structural Features

2.jpg



1 Housing

Ø Double-shell construction

Ø It is rigid enough to withstand the inlet pressure and the pressure difference between the inside and outside of the cylinder

Ø The installation depth is varied to meet the requirements of the NPSH of the device

Ø Isobaric design for inlet and outlet

Ø The inlet and outlet flanges are positioned in various positions to meet the requirements of different pipeline configurations

Ø The outer casing can be removed and used as a tank or pipeline pump

2  Import and export sections

Ø The inlet and outlet ends adopt the method of integral casting and inlet and outlet flange welding

Ø Minimize the axial length of the pump

Ø Easy maintenance

Ø There are various types of inlet and outlet flanges to meet the requirements of different sealing types and pressures

3 Sealing rings

Ø Replaceable pump body and impeller seal rings

Ø The wear-resistant ring is fixed with interference fit and seam screws

4 Impeller

Ø Precision casting and polishing to ensure the design effect

Ø The CFD design guarantees maximum hydraulic efficiency

Ø The first stage impeller has excellent low cavitation performance

Ø Curves without humps

Ø Closed impellers are standard

Ø There is a clearance in the axial direction of the impeller positioning, and the temperature change reduces the deformation of the shaft

5 Conductive fluids

Ø There are two types of runner guide vanes and radial guide vanes

Ø The guide vane type is selected according to the working conditions

Ø The radial guide vane has a short axial distance

Ø The runner type guide vane has a small radial size

6  Radial bearing cylindrical support frame

Ø Fully welded, casing connection

Ø Seamless steel tubing is standard

Ø A wide range of materials are available

7  Mechanical seals

Ø The cavity meets API610 and API682 standards

Ø The installation space is large, and various types of mechanical seals can be configured to meet the requirements of various process conditions

Ø Cartridge mechanical seal is standard construction

Ø It can be equipped with various types of mechanical seals such as single and double ends

Ø It can be equipped with dry gas mechanical seals according to the medium situation and the owner's requirements

Ø Various sealing flushing and cooling schemes can be configured

Ø Easy to disassemble

 

8  Balance device

Ø Balance plate device is used to balance the axial force.

Ø Achieve throttling, reduce volume loss, and ensure performance parameters.

Ø Reduce the pressure of the sealing chamber (when conveying saturated or near-saturated media, an external pipe can be used to increase the pressure of the sealing chamber)

Ø It is not easy to lock during operation and is easy to maintain

9  Radial bearings

Ø Graphite/PTFE bearings are standard, other configurations are also available

Ø Self-lubricating of the pumped medium

Ø Bearings are positioned individually

Ø Mounting according to API610 standard, optimized bearing spacing

10 Thrust bearings

Ø Configured as standard for large inclination mated angular contact ball bearings

Ø Equipped with machined steel cage

Ø Thin oil lubrication as standard

Ø The large oil storage chamber of the bearing box is equipped with an independent internal circulation automatic lubrication system, which can not only effectively lubricate the bearing, but also make the oil temperature constant to ensure the long-life operation of the bearing.

Ø When the temperature of the conveying medium is high, the cooling device can be used to reduce the temperature of the oil chamber.

Ø Large capacity design of oil chamber, large oil storage capacity.

Ø Constant oil cup compensates for lubricating oil online, and oil level gauge detects oil level in real time.

Ø The bearing parts can be disassembled and assembled as a whole, and the maintenance is convenient

11 shafts

Ø Integral shaft machining, low-stress treatment

Ø The minimum deflection of the shaft at the mechanical seal is lower than the API 610 standard value, thus increasing the service life of the mechanical seal

Ø Reasonable coupling method ensures the concentricity of the shaft at the special insertion depth

12 couplings

Ø Extended diaphragm coupling is standard

Ø Other types of couplings can also be selected

Ø The key connection is fixed

Ø ISO1940-1 G2.5 Balanced Rating

13 Motor bracket

Ø Complete welding

Ø The observation hole can also be used as a maintenance hole, and the bearing parts, sealing parts and balance parts can be repaired without disassembling the motor and motor support

14 Materials

Ø API material options from S-4 to D-2

Ø Meets NACE and low temperature material standards

Ø The use of corrosion-resistant coatings can improve the service life of critical parts

Ø Non-metallic wear-resistant parts, which can improve the use environment and improve performance parameters

Ø Strong corrosive medium, Monel, Hastelloy, duplex stainless steel and other materials can be used

Ø Other materials can be selected according to the working conditions



Mounting type:

Standard structure

Ø Suitable for most applications of vertical bobbin pumps;

Ø The position of the suction pipe and the discharge pipe is in the upper part of the mounting base;

Ø Suction pipe and discharge pipe are arranged at 180° to each other;

Ø Can be used as a standard line pump;

Ø Housing only withstands inlet pressure;

Ø The base can be selected as welded or flat according to the installation space and the owner's requirements;

Ø The pump is equipped with a housing drain pipe for easy maintenance.

 3.jpg


Tank pump and submersible pump structure

Ø Can be installed on the tank as a standard tank pump;

Ø Can be installed on the intermediate tank as a

booster pump;

Ø Selectable insertion depth for use as a standard

submersible pump;

Ø The position of the discharge pipe can be installed on the upper part of the flange;

Ø No need to install the shell, flexible movement;

Ø The installation flange can be set according to the

owner's requirements;

The minimum opening diameter and minimum liquid level of the tank or intermediate tank are set by the manufacturing plant.

4.jpg

Flange connection

Ø Flange connection structure is adopted according to the installation space requirements;

Ø The location of the discharge pipe is in the upper part of the mounting flange;

Ø The direction of the discharge pipe can be set freely in the horizontal direction;

Ø Suction pipe connection can be selected flange direct connection or container connection;

Ø The installation foundation adopts section steel welded frame or civil foundation;

Ø The installation dimensions are agreed upon by the manufacturer and the owner.5.jpg


Standard hydraulics:

1.jpg

标签:vertical,Pumps,Turbine,VS6,Suspended,VS1
Online Service
Contact

TEL

+8618507312158

+8613974960765

WeChat
Online
Service